RUCKUS Indoor and Outdoor Access Points (APs)

|

Access Points - Indoor and Outdoor

RUCKUS Indoor, Outdoor, Bridge and Specialty Wi-Fi Access Points (APs)

Forum Posts

Sorted by:

ASK the Pack

One of the reasons for the slow downlink of the R650.

Hello everyone, https://community.ruckuswireless.com/t5/SmartZone-and-Virtual-SmartZone/Slow-downlink-for-the-R650-registered-in-vSZ/m-p/98420#M5722In a different route than the previously mentioned topic, the issue of slow downloads on the R650 has ...

passthrough on lan2 not working on T750 with fiber uplinks (does work on T750 with Cat6 uplnk)

anyone seen this or have a config that would resolve? if i try to use lan2 to pass through a CAT6 cabled connection on an AP that is connected with fiber (using LAN1 for POE power only), it switches to wireless uplink meshing with closest AP and igno...

Ruckus R350 with OpenWRT/Qualcomm Dev Kit

Hi I have acquired a Ruckus r350 access point (on the secondhand market) and it seems to have come with a variation of OpenWRT on it (Qualcomm Software Development Kit). How do I revert this to stock Ruckus firmware - (namely unleashed) I have the a...

Not able to access the web page.

Hi,I ordered new R350 AP to use for test bench, I'm able to connect the Wi-Fi network with PC with the serial number as password. I also connected the AP with ethernet cable.But I'm not able to access the web page with IP 192.168.0.1 given.I tried wi...

R670 - Standalone Firmware

I have flashed an R670 with the Standalone Firmware that is available for this AP (122.0.0.0.5114). Went to set it up as a survey AP and found in the GUI there is no option to configure the 6GHz radio. Looking into this, previously with the WiFi6E AP...

Related Self-Help

Find More Solutions

Top Kudoed Authors

User

Count

1

1

1

1