RUCKUS Indoor and Outdoor Access Points (APs)

|

Access Points - Indoor and Outdoor

RUCKUS Indoor, Outdoor, Bridge and Specialty Wi-Fi Access Points (APs)

Forum Posts

Sorted by:

ASK the Pack

No power to Zoneflex R510 series Unleashed

Had done some work in the attic yesterday and finally got to where i could make some electrical connections in the house but i had to switch a breaker off. Not knowing my ruckus router and AP were on that same breaker i had it off for roughly 30 minu...

I have several new R320 ap's and a vscg-E running 5.1.1.0.598 and they will not join.

I have several new R320 ap's and a vscg-E running 5.1.1.0.598 with AP Patch 2150 and cannot get these to join my VSCG and they are on the same subnet. Pretty frustrating . I have set the SCG to the VSCG's ip and also did a set director to the vscg'...

After meshing 2 R710s, several clients can't access the internet

For the longest time, we had the two APs separate because the first of the two was set up prior to me working here. That AP started disconnected randomly so I decided to reset it (because I didn't have the credentials) and mesh the networks as I thou...

Ruckus IoT BLE module question about location tracking

Our company has deployed Ruckus r710's throughout the office. We also happen to develop a realtime situational awareness platform. We are looking to track BLE tags around the office. Does the IoT gateway or SPOT allow for this? I have asked Ruckus sa...

What is the best way to move aps from default grp to new grps in SZ300.

We have over 100's of ap's under Zone(ABC)- Grp1-Grp2-Defaultgrp. I have the mac address of the aps grp wise. Is there a way to move ap's based on mac address from default grp to say grp1. i dont want to select ap one by one in GUI. Any suggestion wi...

Related Self-Help

Find More Solutions

Top Kudoed Authors

User

Count

1

1

1

1

1