RUCKUS Indoor and Outdoor Access Points (APs)

|

Access Points - Indoor and Outdoor

RUCKUS Indoor, Outdoor, Bridge and Specialty Wi-Fi Access Points (APs)

Forum Posts

Sorted by:

ASK the Pack

R510/R600 WAN DHCP IP issue

I have an R510 with Unleashed 200.6 and R600 with Unleashed 200.7 connected to a Juniper SRX 240 firewall. The SRX has a DHCP server with reservation assigned for the APs' WAN but for some reason the IP address is being acquired and released multiple...

ZD1200 not being seen on network

Hi all,We have a site that uses R500 APs and a ZD1200 to manage then in a mesh config.The APs cannot see the ZD1200 and we cannot see it on the network so we are left with no WiFi system currently. I have checked the cabling against a known good site...

Intermittent WiFi Calling Issues

Are there any setting or protocol configurations I should be sensitive to for iPhone and/or AT&T phones to ensure WiFi calling service?I am running two R500s Unleashed. They are on v200.7.10.102.64. My firewall/router is a Netgate SG-3100 running ...

Assign DHCP uniquely to a particular SSID?

Current setup: 6 APs in an unleashed network, serving up 4 separate SSIDs. DHCP turned off on Rukus, and managed by non-Ruckus routing infrastructure.Requirement:We would like to route for clients that come in on a particular SSID (call this SSID-4...

R510 - Building the Unleashed Network. It may take a few minutes.

I have the following problem with the R510. I put firmware R510_200.7.10.102.64.bl7 and at the time of entering the Master this error comes out:Building the Unleashed Network. It may take a few minutes.I entered by ssh and I did a get director and I ...

Related Self-Help

Find More Solutions

Top Kudoed Authors

User

Count

2

1