ZF7982 Change Manage controller to Standalone AP

[Radhika]

Dear Team,

Please provide the solution how to change ZF 7982 Managed controller to Standalone AP for personal use.

current Software 

Software Version: 10.1.1.0.26

Please provide the solution and links of software version. 

while upgrading the firmware error

Upgrade/Downgrade from FSI to UI is not allowed.

[Vineet_nejwala · Accepted solution]

Hi @Radhika 

1) Perform a f/d on this AP by CLI or physical reset button.

rkscli: set factory

or

On the AP back console using paper clip, press hold the button which says "Hard Reset" within a tiny circular port for about 10 to 12 seconds.

2) Download this bundled image and extract 104 image for ZF7982

https://support.ruckuswireless.com/software/1017-zoneflex-solo-access-point-104-0-0-0-1347-ga-softwa...

3) Upgrade using CLI or WEB :

https://support.ruckuswireless.com/articles/000001551

https://support.ruckuswireless.com/articles/000001179

If the issue persist share below output from AP CLI :

fw show
fw show all
get version

Best Regards

Vineet

[Radhika]

Hi,

Thanks for your support no its working Standalone AP.