Cant access R310 after factory reset

Hi, factory reset an old r310, cannot get access to it afterwards. I can see the configure-me WLAN and have connected to it. I can ping the interface 192.168.0.1 but it 'request time out'. I have disabled all firewalls on windows 10 PC used for acces...

r310 factory reset

APs for large IOT & mesh network

I am a prospective user for Ruckus APs.I have a large home, with about 320 2.4 GHz IOT devices, most of them Wiz lightbulbs and Kasa smartplugs. I only have Ethernet wiring between 2 rooms, and must use mesh network to support clients in all location...

Access Point Flagged review

Hello we have a Ruckus R650 AP that is consistently reporting a "Flagged" state. The others at the location appear to be performing fine.I understand these are threshold values that we can modify to "Low" to prevent it from being flagged as often.Can...

Support Firm Ruckus AP R710

I have an AP running in Unleashed mode. I would like to install a different firmware so that this AP can join an SZ144 controller. However, when I try to upgrade the firmware from the AP's upgrade page, the upgrade option is not available and the AP ...