CommScope RUCKUS Community Forums

Lost POE on two 6450 switches after power outage.Have multiple ICX 6450 switches deployed in a large store in Oregon.  Thanks to power outages last night...  all the switches came up, but two are not longer providing POE.  Tried reloading, hard reboo...

Very simple question!Replacing an icx7250-48p-poe with the exact same model, current one has a couple bad ports.I was just going to copy the startup-config.txt to the new device.  (USB or TFTP)But.. they are at different flash versions.startup-config...

Setting up a new 4 ports LAG for a newSAN. I basically copied the LAG settings from the current production one. (still new to this!)   lag LAG10 dynamic id 10  ports ethernet 1/1/41 to 1/1/44  primary-port 1/1/41  deploy  port-name MCF- NEW...

First off...  Thanks everybody who has been answering my questions about the ICX 7750 campus network I inherited! Been a great resource while I come up to speed on Ruckus.   Question is:   My campus switches have basically the below DSCP/LLDP Voic...

This a pretty basic questions, but I just want to confirm when I add a port to a VLAN that is already setup... I don’t have to add all the ports already configured?   Seems a stupid questions...  but have a bunch of production switches & no test pl...