Lost POE on two 6450 switches after power outage

[james_pethigal]

Lost POE on two 6450 switches after power outage.
Have multiple ICX 6450 switches deployed in a large store in Oregon.  Thanks to power outages last night...  all the switches came up, but two are not longer providing POE. 
Tried reloading, hard reboot by power off/on
Confirmed llpd & cdp enabled
Have no tech support, but do have RMA if needed.  
Any suggestions?

Power Capacity:         Total is 740000 mWatts. Current Free is 740000 mWatts.

Power Allocations:      Requests Honored 0 times


 Port   Admin   Oper    ---Power(mWatts)---  PD Type  PD Class  Pri  Fault/
        State   State   Consumed  Allocated                          Error
--------------------------------------------------------------------------
  1/1/1 On      Off            0          0  n/a      n/a         3  n/a
  1/1/2 On      Off            0          0  n/a      n/a         3  n/a
  1/1/3 On      Off            0          0  n/a      n/a         3  n/a


  detail                        show inline power detailed information
 

show inline power detail


Power Supply Data On stack 1:
++++++++++++++++++



Power Supply Data:
++++++++++++++++++

Power Supply #1:
        Max Curr:       13.7 Amps
        Voltage:        54.0 Volts
        Capacity:       740 Watts
power supply 2 is not present
power supply 3 is not present


POE Details Info. On Stack 1 :


General PoE Data:
+++++++++++++++++

Firmware
Version
----------------
02.1.0 Build 004



Cumulative Port State Data:
+++++++++++++++++++++++++++

#Ports    #Ports     #Ports   #Ports    #Ports       #Ports     #Ports
Admin-On  Admin-Off  Oper-On  Oper-Off  Off-Denied   Off-No-PD  Off-Fault
-------------------------------------------------------------------------
48        0          0        48        0            0          0



Cumulative Port Power Data:
+++++++++++++++++++++++++++

#Ports  #Ports  #Ports        Power       Power
Pri: 1  Pri: 2  Pri: 3  Consumption  Allocation
-----------------------------------------------
0       0       48          0.0   W     0.0   W


Any suggestion would be welcomed!

Cheers - James 

[jijo_panangat]

We need to debug the faulty unit to understand if this can be software fixed, Pls work with the tac case owner.

Thanks
Jijo