CommScope RUCKUS Community Forums

I have a BGP setup that looks like this, and although it is working great for two WAN circuits (for redundancy), I would rather advertise only local routes though..  Currently, I am doing an AS Pre-Pend to load-balance the incoming traffic a little, ...

I have all the workstations at one site unable to pull an IP address from DHCP suddenly this morning and no idea why.  This is a small site running a single ICX 7150-48-POE unit with Layer-3 code for 08.0.90e.The users are only getting 169.254.x.x AP...

For the ICX 7xxx series, which release is suggested?Should we be sticking with 08.0.80 builds (i.e. upgrading from 08.0.80d to 08.0.80e)or is it preferred to jump to 08.0.90 builds (i.e. upgrading from 08.0.80d to 08.0.90b)Please let me know what Ruc...

NTP is syncing properly, and the time is correct, but 08.0.30t does not calculate the system started time properly.  This adversely reports the wrong information to tools like Solar Winds, too.SSH@Building_15_Stack#sh ver  Copyright (c) 1996-2016 Bro...

Why is the system started time incorrect when the clock is fully synchronized?SSH@Garage#sh ver  Copyright (c) 1996-2016 Brocade Communications Systems, Inc. All rights reserved.    UNIT 1: compiled on Feb 13 2019 at 17:44:50 labeled as ICX64S08030t ...