CommScope RUCKUS Community Forums

tony_butler_9y6 · 02-13-2020

If you solve this, you could be the one! We have a closed network environment with NO ROUTER, but we do have a layer 3 switch. Please refer to the diagram; we have a server with IP address 192.168.1.3/24 with gateway of 192.168.1.1 The server is c...

tony_butler_9y6 · 02-13-2020

Needing a little help here please. We have an environment with no router, but we do have a layer 3 switch. Please refer to the diagram; we have a server with IP address 192.168.1.3 connected to Ethernet port 1 of the Brocade Ruckus ICX 7150 switch....

tony_butler_9y6 · 02-13-2020

Our original configurations left out gateway as we had no router and were working on layer 2. After adding the layer 3 switch with ve's we never went back and added the gateways. Once we added the ve ip's as the gateways for each device in its subn...

tony_butler_9y6 · 02-13-2020

Thanks for your input Andrew. Our original configurations left out gateways on the end devices (camera) as we had no router and were working on layer 2. After adding the layer 3 switch with ve's we never went back and added the gateways. Once we a...

tony_butler_9y6 · 02-13-2020

To update, let's take the camera out of the equation. We can't ping the layer 2 switch at 10.174.241.20 from the server at 192.168.1.3 and we can verify the MAC address is correct in arp on the layer 2 and the icx match mac addresses for the switch.

tony_butler_9y6 · 02-13-2020

Show ARP from the ICX shows the correct MAC addresses of the layer 2 switch and camera. I've verified the port the camera is on is set to vlan 351, however the layer 2 switch has a different IP subnet than the camera, show arp on that switch doesn't...

tony_butler_9y6 · 02-13-2020

We've made a few updates since this was posted, but we still can't communicate across the subnets. I realize I left off a lot of information while trying to stick to the basics. We've figured a lot out, but we're not there yet. We made a VE on por...

CommScope RUCKUS Community Forums

User Statistics

User Activity

Pulling out hairs and I'm already balding - ICX routing help

icx 7150 routing

Re: icx 7150 routing

Re: Pulling out hairs and I'm already balding - ICX routing help

Re: Pulling out hairs and I'm already balding - ICX routing help

Re: Pulling out hairs and I'm already balding - ICX routing help

Re: icx 7150 routing