Hello,
I have 2 stakcs. One of them has 9 switches and another one has 11 switches. I activate loop detection for all vlans.
When I connect my uplink to stack masters, there is no problem. Loop detection works.
But when I connect uplink to ...
Hello,
I have following problem when enter this:
CUS(config)#arp 95.183.181.254 00e0.4c68.0b7d ethernet 5/1/13ADD static arp 95.183.181.254 -> 00e0.4c68.0b7d -> 1/2/5 (VRF: 0)Error - ip address not directly connected
I want to bind my pc ip ...
Hello,
During interactive stacking, I get this error:
You selected 8 unit(s): #1: ID=2, #2: ID=3, #3: ID=4, #4: ID=5, #5: ID=6, #6: ID=7, #7: ID=8, #8: ID=9,T=2h5m50.7: Error! stack interactive-setup option 2: link 9/2/1 to 1/2/4 has different of...
Hello,
I installed l3-prem-2X10G license but my ICX 7250 does not have L3 features. What could be the problem? I reloaded the switch but it is has l2 features, not L3.
ICX7250-48 Switch#show version Copyright (c) Ruckus Networks, Inc. All righ...
The problem is solved. When you build a stack, you either use only passive cables between stack members or use only active cables between stack members. No mixture of those cables together in stack ports. It was written in stack manuel but it was har...
Thanks to Mr. Abiel Bermudez, the problem was solved when loop-detection interval command was removed from configuration. The default loop detection period is 1 second without that command.
Arp inspection prblem solved. I have to enable it in vlan with ip arp inspection vlan command.
I will try source-gurad with a VE interface configured. Thanks a lot.
Thanks you have a point but what I do not understand is why loop detection works when I connect my fiber uplink to master switch. If uplink is connected to any switch in stack besides master, loop-detection does not work.
Loop-detection works whe...
