Hello till now we were deploying high amount of SZ100 clusters, but recently we are switching to vSZ high scale. We always place SZ or vSZ to same subnet as APs.With SZ100 AP gets IP from dhcp (no dhcp option 43) and is discovered by the controller ...
Hello,Want to somehow make icx module work from ansible, but running into a problem.I have a simple playbook just for testing (show ver) but it gives me an error:---- name: show ver hosts: all gather_facts: no connection: local vars: ansible_n...
Hello just to add with differences:
vSZ-H does not have L2 discovery (same subnet AP discovery)
vSZ-E Has 60 seconds update interval where High scale has 180 if I am not mistaken.
I would suggest vSZ-E for your deployment.
Hello Syamantak,I tried on different vSZ we deployed recently and command is not there, might it be difference between vSZ-E and vSZ-H ?We were told that there is no difference and we should always use High scale. I also tried on 104 without any issu...
Hello, I tried what you suggested but somehow this command seems to be not working,vSZ was on 5.1.2.0.302 now I did update to 5.2.0.0.699. and neither discovery or debug command works.
Hello,Thanks for interest!Yes I am sure, we were deploying SZs from end of 2017 starting with 3.5 and I did it same way even with 3.6, 5.0, 5.1. ( I personally did about 5 clusters of SZ 104 ) Always the same, jut same vlan and subnet, and APs were ...
