Hi, I realized that after the recent upgrade most of my clients which are in fact Sonoff WLAN-Switches (mostly ESP8285) running Tasmota are incorrectly shown as Apple devices (specifically as Apple Mac/Mac OS X 10.15.7) in the Unleashed Web UI.Is the...
Dear all,
a Raspberry Pi 4 / raspian won't connect to Unleashed 200.10.10.5.246 w/ 3 APs in WPA2/WPA3-Mixed mode. It works fine when changing to WPA2 mode. Not sure about the exact reason, does anyone have an idea?
- Joachim.
PS:...
Dear all,
I am a (prospective) Ruckus newbie interested in the following setup with a couple of R650’s: the R650's would be connected over 2.5Gb Ethernet to a Mikrotik router 10.1.0.1 offering dhcp within 10.1.0.0/16; 10.1.0.1 is a NAT-gateway towar...
> - test R320 with any other PoE source.> - Other devices supporting 802.3af power are able to power up via same port/cable where R320 was connected.I did both, the PoE circuit of the device is the culprit, it works fine w/ 12V DC. The device is long...
Thanks for your answer! Sorry to be a nuisance, but this states the max. power consumption at the given voltage (thus the minimum voltage and current you have to supply), not the max. voltage you can supply to the device. The latter depends on the DC...
OK, a few Google searches later :-): Seems to be a know problem of the RPi4s (e.g. https://www.raspberrypi.org/forums/viewtopic.php?t=287498). Moderators might want to remove my post above, otherwise it can stay for documenting the problem.
- Joachi...
Here's some feedback: I switched smart-roam and Channelfly off, and I am running self healing since 10 days now. The iPhone users report that the situation did indeed inprove. I'd still be interested to learn to what values self healing actually adj...
