CommScope RUCKUS Community Forums

chetansinh_dabh · 03-22-2023

I configured Radius server and set some credentials in the ZD1200. but Radius server Windows 11 Only working, Windows 10 not working, A per AD policy 802.

chetansinh_dabh · 01-04-2023

If possible change the username and password in ZD1200 via CLI?if Yes, so how to change the username and password in ZD1200 via CLI?

chetansinh_dabh · 10-11-2022

Access Point connect-disconnect issues, Random behavior, (available models - R320, R650, T310C)every time refresh page the AP connect list sometimes shows 12 or 14 or 15, or 18.one AP did not connect with the zone director, even if we connect any AP,...

chetansinh_dabh · 10-11-2022

even if we connect any AP, the firmware upgrade shows the same and does not upgrade. So please solve this problem.Why does a Ruckus AP fail to join the intended ZoneDirector?

chetansinh_dabh · 07-04-2022

Please confirm that SZ104 or SZ124 is in the network if it becomes fails down can affect AP and the entire network or not?Will the network continue or shut down?@mjha@zengroup.co.in

chetansinh_dabh · 03-24-2023

We have checked NPS settings, the evening is as per the ruckus doc, we are unable to log in windows 10 operating system, only supports windows 11 systems, can you help with any use case of NPS Radius?

chetansinh_dabh · 01-04-2023

ruckus(config-admin)# name adminThe command was executed successfully. To save the changes, type 'end' or 'exit'.ruckus(config-admin)# name admin password admin123The command was executed successfully. To save the changes, type 'end' or 'exit'.ruckus...

chetansinh_dabh · 10-12-2022

All APs are pinging but showing APs are connect-disconnect, and We have already put the above command (set director IP "ZD IP", then reboot) but not connect AP with ZD. even if we connect any AP, the firmware upgrade shows the same and does not upgra...

chetansinh_dabh · 10-11-2022

- Zone director firmware version? 10.3.1.0 build 45- Current AP firmware version? (SSH into an AP and hit a command #get version) R500_104.0.0.0.1347- Please check the release notes from ZD version and check if AP is supported: Yes, this is suppor...

chetansinh_dabh · 06-14-2022

Thanks for the response Vineet,already all steps follow but not successfully done web authentication.

CommScope RUCKUS Community Forums

User Statistics

User Activity

Radius server Windows 11 Only working, Windows 10 not working, A per AD policy 802.

how to change the username and password in ZD1200 via CLI

Access Point connect-disconnect issues, Random behavior

even if we connect any R500 AP, the firmware upgrade shows the same and does not upgrade to ZD1200.

SZ104 and SZ124

Re: Radius server Windows 11 Only working, Windows 10 not working, A per AD policy 802.

Re: how to change the username and password in ZD1200 via CLI

Re: Access Point connect-disconnect issues, Random behavior

Re: even if we connect any R500 AP, the firmware upgrade shows the same and does not upgrade to ZD12

Re: How many create user in local database in web authentication