how to convert ICX 8200 from Router to Switch mode.

[chetansinh_dabh]

how to convert ICX 8200 from Router to Switch mode.

can you possibly, change the mode from router to switch?

I am showing in the switch both images are in router mode.

ICX8200-24P Router#show version

UNIT 1: compiled on Nov 1, 2022, at 00:46:53 labelled as RDR10000
(78438264 bytes) from Primary RDR10000.bin (UFI)
SW: Version 10.0.00T253

[BenBeck]

Starting with 10.0, the switching image is deprecated. There will only be the one image (routing) for each platform starting from 10.0. Switching features are still available in this image. Hope that helps!

[Miguel_Coveñas]

Alguien sabe el comando para agregar 4 VLAN pasarlo a modo troncal? es apra un switch ICX8200

[BenBeck]

Here's an example

Enable 

Conf t

Vlan 10 20 30 40

Tagged eth 1/1/1 (change/add ports as needed)

The above would allow tagged packets for vlans 10 20 30 40 across port 1/1/1.

[Miguel_Coveñas]

Ok muchas gracias.