CommScope RUCKUS Community Forums

FL2CO · 02-12-2024

My WIFI has been going out daily and I'm not sure of the cause. There are no issues with the modem (it has it's own SSID that I can use when Ruckus goes down and that works without issue) and I have power flowing to the APs and the APs are broadcasti...

FL2CO · 01-17-2024

I started having issues with my system a few days ago and yesterday it stopped running internet traffic. The SSID was still broadcasting, but it was basically dead for traffic. After powering down, unplugging, and all the usual steps I tried loading ...

FL2CO · 02-15-2024

This took a bit to gather all the parts and pieces but after downloading the driver I was able to establish my connection through Mac terminal. I ran the commands, as specified and it seems to have completed the required changes. I will connect the ...

FL2CO · 02-15-2024

Hi Fernando-The WAPs stay up and are broadcasting the SSIDs I have setup. The issue is that even through I an connected to the SSID, the data is either slow or there is no data flowing through to my devices. They effectively loose connection to the i...

FL2CO · 02-14-2024

I wanted to share how this was resolved. I reset everything, as described. It took 8 hours for the system to come back and broadcast the proper SSID but it did eventually come back online. It was stable for about 1 month, then the issues started happ...

FL2CO · 01-18-2024

Hello, and thank you for the reply. It seems that the AP came online overnight and it is broadcasting the new SSID. I am still having a few issues:The slave AP has not synced up and is still broadcasting the Recover.Me.xxxxx address. My switch is sho...

CommScope RUCKUS Community Forums

User Statistics

User Activity

Switch issues - stops working and WIFI goes down

System stopped working, AP was factory reset and it won't broadcast new SSID

Re: Switch issues - stops working and WIFI goes down

Re: Switch issues - stops working and WIFI goes down

Re: System stopped working, AP was factory reset and it won't broadcast new SSID

Re: System stopped working, AP was factory reset and it won't broadcast new SSID