CommScope RUCKUS Community Forums

GreensTheorem · 05-07-2024

I was testing a deployment of Virtual SmartZone High Scale 6.1.2.0.441 with a bunch of R850 APs and tried to connect one AP via Mesh.Sadly, I wasn't able to get this AP to work. When I tried to connect the R850 AP via Mesh, it would stay at "Offline"...

GreensTheorem · 03-14-2024

Hey,I've got an ICX7150-C12P running SPR08095m.bin (UFI)When I try to upgrade to 09.0.10 viacopy tftp flash 192.168.129.30 ICX7150/SPR09010dufi.bin primary ...lots of output, but no errors copy tftp flash 192.168.129.30 ICX7150/SPR09010dufi.bin secon...

GreensTheorem · 01-29-2024

Hi,I have the following bug to report.Platform: Copyright (c) Ruckus Networks, Inc. All rights reserved. UNIT 1: compiled on Aug 8 2023 at 22:37:59 labeled as SWR08095m (30264164 bytes) from Primary SWR08095m.bin (UFI) SW: Version...

GreensTheorem · 11-13-2023

Hi,Is support for Intel E810 NICs in SmartZone on the roadmap? The newest support NIC is X710/XL710, which is only 40G generation and some years old.I'm aware that (Virtual) SmartZone is currently based on a CentOS 7.Is this on the roadmap for vSZ / ...

GreensTheorem · 11-03-2023

How many streams do Ruckus Access Points utilise when used in a Mesh?Let's say I Mesh an R750 with an R750 on 2.4Ghz - Will it use 4 streams or 2 streams?What if I Mesh an R750 with an R650 on 2.4Ghz - Will the bandwidth be lower because the R650 onl...

GreensTheorem · 02-08-2024

Hi @Chandini > What about if you try to set a password ? Is there a issue noticed ?Nope, it's just for "nopassword" - I was trying to temporarily set no password as I was doing some lab work on the switch and was tired of having to log in> and when y...

GreensTheorem · 12-30-2023

R730 only supports pre-standard 802.11ax and some features like UL-OFDMA are disabled (or should be disabled) in firmware, as they're buggy in hardware (silicon).I would avoid the Standalone firmware. Either use the R730 with a ZoneDirector / Smartzo...

GreensTheorem · 11-13-2023

Hi @syamantakomer I'm on SmartZone 6.1.1 with AP Patch 6.1.1.0.1322I need to configure a Mesh, but there is a thick concrete wall in between the two APs, so 2.4GHz is probably going to be the better option than 5GHz (no direct line of sight).I have c...

GreensTheorem · 11-03-2023

Thank you.Will there be any noticeable interruption in services during failover, e.g. for RADIUS authentication or tunneled traffic?If the failed node is brought, will the APs automatically be redistributed to both nodes or is it required to manually...

GreensTheorem · 11-03-2023

Hi @sanjay_kumar I am not looking for cluster redundancy.I am interested in single cluster and what happens if one cluster member fails.

CommScope RUCKUS Community Forums

User Statistics

User Activity

vSZ-H Mesh Not Working

Can't Update ICX7150-C12P to 09.0.10

Bug Report: sh: can't create /proc/softlockup/cancel: nonexistent directory

vSZ support for Intel E810 NIC?

Number of streams in Mesh

Re: Bug Report: sh: can't create /proc/softlockup/cancel: nonexistent directory

Re: Ruckus r730 Solo - Issue with 802.11ax

Re: Number of streams in Mesh

Re: (v)SZ High Availability - how does it work?

Re: (v)SZ High Availability - how does it work?