Network Environment: vSZ-H version : 6.1.2.0.404Windows Server 2016Setup Procedure:This demo explains the configuration steps to authenticate wireless clients using 802.1x- SZ/vSZ by configuring NPs policy on a Windows server.1-Make sure if the belo...
Summary:In this article, we will look into the steps involved in setting up Self Registration Guest Pass Generation in Smart Zone controller running in 6.1 versionNote: This feature is available since 6.1 version onwards Network Environment: SmartZ...
Summary:In this article, I am going to explain the configuration steps of Social Login Guest Portal authentication with Google.Network Environment: SmartZone/Virtual SmartZone [Essentials/High-Scale] (Controller), version 6.1.1.0.x.R350 (Access Poin...
Summary:In this article, we will look at the steps involved in setting up Guest Portal authentication with Social Media Login, in this case via Google.Network Environment: SmartZone/Virtual SmartZone [Essentials/High-Scale] (Controller), version 6.1...
Hi Terrill,
If you are able to SSH, please open a WebUI using https://<controller_IP>:8443 then walk through with the set up, there you would be able to set up the admin credentials
Hi Terrill,
The default admin credentials are as follows:
Default Admin Username: adminDefault Admin Password: adminDefault Enable Password: admin
Please confirm if you are accessing console or SSH.
If you are accessing SSH then I assume you have se...
Hi Craig,
Is the issue noticing to all the clients or just the iOS?
Also, did you get a chance to check if HTTPS/HTTP traffic is allowed at the firewall's end??
