Hi Syamantak, I have a R510 with .233 that exhibited the reboot loop when WiFi Calling was enabled; detailed in case # 01185183 .
I'm totally fine with not using WFC and while I'm happy to help test things if your engineers need me to, I'm really ...
802.11r & k can be helpful if you clients support them (the iPhone does) - it allows the connection to the new AP to be setup before losing the connection to the old AP so the transition is faster/seamless. This way as the client changes APs (and ch...
I have seen bootlooping with a single R510 AP on .233 - it became markedly worse (uptime of at least 23h -> 5.5 minutes) when I enabled WiFi calling, details below. I'm also seeing @emes error 3-5 times a second (~100/minute). I have logs around th...
@veno77 https://support.ruckuswireless.com/documents/3625-ruckus-unleashed-200-9-ga-refresh2-release-notes
Edit: somehow missed this in the reply below but leaving this here so it's at the top.
DFS is there to prevent interference with other users of the spectrum (not WiFi, radar and such) and the AP must change channels if it detects those users but that would only explain the AP choosing a different channel.
