CommScope RUCKUS Community Forums

vladimir_buzuev · 03-11-2021

Hello, Hope somebody can help me to understand and fix the problem below, thanks. Setup (Lennar home): R510 + ICX7150-C12 + AT&T Router (with Fiber broadband) R510 is connected to the Switch's port 11 and is PoE, Router is connected to Switch's por...

vladimir_buzuev · 03-14-2021

Well, had to reflash both primary and secondary flash with switch flash, works OK now...

vladimir_buzuev · 03-12-2021

Brock, Have you been able to resolve the problem, did rebooting using primary (switch) flash help? I have a very similar one, but in my case the switch can't boot using primary flash for some reason, so I still have router flash...

vladimir_buzuev · 03-11-2021

So, I see that Switch has "switch" mode primary flash, and "router" for the secondary: SSH@ICX7150-C12 Router>show flashStack unit 1: NAND Type: Micron NAND 2GiB (x 1) Compressed Pri Code size = 28660224, Version:08.0.90dT211 (SPS08090d.bin) Comp...

vladimir_buzuev · 03-11-2021

So, I tried to reboot the Switch using primary flash using boot system flash primary yes but it failed and used the secondary one. And it seems it IS in router mode at least based on the device name:`SSH@ICX7150-C12 Router>show loggingSyslog loggin...

CommScope RUCKUS Community Forums

User Statistics

User Activity

Laggish connection after power outage

Re: Laggish connection after power outage

Re: Power Failure Causes Switch to reboot into Router Mode

Re: Laggish connection after power outage

Re: Laggish connection after power outage