We are a school with some pretty smart students! A few are trying out using a VPN to bypass our firewall content filtering system. I'd like to block that connection attempt at the access point. My thinking is to deny traffic using an Application Port...
My R600's are managed by a ZD1200. I can't reach the individual AP's via their IP address in the browser. I'm guessing I missed something when I set up the 1200. Can someone point me to a global setting that enables this feature? Thanks...
This is so odd. High school campus. Due to a certificate error on the network over the summer, we had to set up an open SSID for students. Once they reached the network, a new cert would come down and then most machines will automatically switch to o...
We have a ZD 1100 with 24 AP's. I have configured alarms to send an e-mail to me when triggered. In KB 3407, it says the timeout is 30 minutes. That's way too long if I have an AP down. What is the best way to change this setting?
Updating this post; I worked with Support for several days. Ultimately, we updated the firmware to the current version and made a few small configuration changes, including removing the temp SSID so that no leftover settings would exist. This solved ...
Opened a case. I was told this could be caused by the cache on the ZD still being in place and that I can clear it via a reboot. I did so and then disabled the temp SSID. That did not fix the problem. I had to re-enable the temp SSID so that users wo...
