RUCKUS ZoneDirector (ZD)

|

ZoneDirector

With simplicity and ease of use in mind, the RUCKUS ZoneDirector is purpose-built to address the gap between standalone, feature-deficient access points (APs) that must be individually managed and the costly, complex high-end enterprise systems that are overkill for most small business environments.

Forum Posts

Sorted by:

ASK the Pack

ZD1200 problem with PDA devices

Hi everyone, When I updated ZD1200 to version 10.0.0.190 i constantly have problem with PDA devices (datalogic scorpio X3 on WinCE) PDA connect to newtwork and works fine, after PDA goes to sleep it wont connect anymore. Can someone have any ide...

Issue Connection 2.4Ghz and 5Ghz can not stable

I have got issue within this below -2.4 dan 5 ghz enable some windows connect successful ( 802.1x authentication)-2.4 Ghz only some windows successful connect ( 802.1x authentication)-5 GHz Only windows can not connect ( 802.1x authentication)-W...

will SNMP damage the zone director 1200/1205

Yep.. it sounds like a stupid question, but does R/O SNMP do anything to a zone director that is likely to make it fail? In particular, does it cause excessive writing/reading from NVram or Nand memory,when enabled? or is the data written to ...

ruckus 1200

Have a 1200 on the latest firmware 10.5.0.0 build 190. some clients are either: 1. loosing the pw for the wifi point 2. loosing the ip address on the client, but teh 1200 clearly shows the mac & ip address as authorized. if I go into "clien...

Upgrade firmware for ZA1200.

Hi everybody, I have a wireless controller ZD1200 model runnig 9.10.2.0.76 (MR3, Refresh 76) firmware version and APs T300 and R610 series, my question is: what is the recommended version to upgrade it? And what is the procedure to goal this? Than...

Related Self-Help

Find More Solutions