RUCKUS Community Forums are now in READ-ONLY mode while we migrate to a new platform.
You will still be able to read posts and knowledge articles, but will be unable to post new content until Go Live on the new platform Monday August 17.
Lennar Smart Home customers: please contact [email protected] for assistance during the week of August 9-17.
Hello,We are a ZD1150 customer with a dozen or so zf7982 AP's running 9.7.2.0b9 firmware.We are looking for greater control over the guestpass access "valid for" time settings.Currently, the user generating the guestpass access has complete control o...
Hello,In the ZoneDirector I get multiple messages of clients who fails to authenticate too many times in a row when joining a WLAN. We configured multiple Open WLAN networks and it happens by all of them. In the Syslog Guide the action is to check th...
User activity in ZD always repeated "state set to mesh learning ruckus" on same access point. (please see attached)please explain me why that log repeated for same AP?Thank You
ZD3025 Guest Pass login page not being redirected to at remote site. This is a new setup, in testing user connects to the Guest WLAN and receives an IP address from a Juniper SRX, The ZD3025 is accessible from the Guest's PC and the gateway on the ...
Under the Configure :: APs :: AP Groups in the ZD menu there is an option to enable N/AC-Only operation under both bands.I would ask for that to be changed as it only serves to confuse my customers. Some think Ruckus supports 11ac on the 2,4G also. H...
