RUCKUS Wireless Questions and Best Practices

|

Wireless Questions and Best Practices

RUCKUS offers a number of Best Practice Guides for all aspects of Wi-Fi system design, installation, configuration, management and maintenance.

Forum Posts

Sorted by:

ASK the Pack

AP-to-AP handoff not working

Our office has been rocking a ZoneDirector 1000 with three ZoneFlex 7962 access points for a number of years now. Two of those APs are on one floor and the third in a mezzanine area above.I get sporadic (but frequent enough that it requires investiga...

ZF7782 AP not picking uplink from ZF7782-S <100m away

Currently facing issues with our mesh AP's not more than 100m away.ZF7782 getting up link from 7782-S and was working when first installed until a week ago. Mesh AP connected to AC power when switched off and on again does not pick up the 5GHz up lin...

R700 logs meaning

Hi,Any ideas what those lines below mean? Anything wrong?Mar 5 13:47:10 RuckusAP1K user.warn kernel: FWLOG: [72188717] vap-0 VDEV_MGR_AP_KEEPALIVE_IDLE ( 0x9b79b8, 0x2, 0x0, 0x1 )Mar 5 13:47:11 RuckusAP1K user.warn kernel: FWLOG: [72189741] vap-0 V...

Excessive MAC Flapping causing slowness on Wifi Network using ZoneDirector 3000 and Cisco 2960S

HiWe currently have a Wireless Network setup consisting of Ruckus ZoneDirector 3000 (using latest 9.9 firmware) and ZoneFlex Model 7982, 7762 and 7363.The Core Switch is a Cisco 4507 R+E with a collapsed core design. Access Switches are 2960S connect...

AP Different IP Pool can't connect to Zone Driector 1100

Hi All,I've Problem to connect the AP which try connect to Zone Director.Explanation :- Zone Director (Located at Factory Office) = 172.30.32.230/24- Factory Office AP (Using Ruckus R300 & Z7372) = 172.30.32.231 - 242 /24- (PROBLEM) Head Office AP ( ...

Related Self-Help

Find More Solutions