I'm setting up an ACL for a WLAN to rate limit iOS devices and allow all others by default. When I apply this method, all non-iOS clients disconnect and cannot connect to the WLAN. I'm under the impression that all non-iOS devices should be able to c...
I have 3 ruckus Zoneflex R310 unleashed AP's and would like to use the IOS Swipe app to control these..At login, à host IP adress is required..When I use the IP adress of an AP, I gey à message: host is unreachable. What should I do?
So I ordered a few R600 UNLEASHED APs for a client site that is having tremendous interference issues (4 story building with multiple tenants per floor) with their current APs (Sophos JUNK).I find it frustrating, if not laughable that the Unleashed A...
I configured the R600 as the Master AP and wanted the R500 to be joined. After upgrading the firmware to 200.1.9.12.55 it was found by the Unleashed network, but it's permanently disconnected. I made a special subnet for this case: 192.168.64.0...
Does anyone know if an r500 unleached connected a PoE switch has the same power/signal strenght as an r500 connected to an adapter? My r500 has about the same signal strengt and capacity as my Aiport Extreme which is laying on the floor. The EA has b...
