Hello, I am trying to configure a mesh set up using T610S Ruckus devices. I have two devices, one configured as the Master AP with Mesh and Zero Touch Mesh enabled and the other set to factory defaults. I have pre-approved the SN of the RAP, but ther...
Hello All, The RUCKUS Unleashed 200.15 MR GA Product Guides have been published on the RUCKUS Support Portal. RUCKUS Unleashed 200.15.6.112.52 Release Noteshttps://support.ruckuswireless.com/documents/4761 RUCKUS Unleashed R350e AP Quick Setup Guideh...
Good day, I have a problem where the Ruckus Unleashed sees a device as an android device and it will fall under the policy to block it. This is not the first time this happens, prior to the current firmware update it used to do this but it would say...
Hi to all, I have one R320, using them for tests cause my company planning to migrate to Ruckus hardware (it will be R550 if it's matter). Firmware is: 200.15.6.12.304 I start Rogue AP in 5Ghz nearby for a test with the same SSID, PSK and frequency a...
I hope this is a bug and not a design choice, because if it's the later someone should seriously rethink their career. Once you change a network from WPA2 to WPA2/3 you're forced to put master/default WPA and SAE password separately - no problem ther...
