cancel
Showing results for 
Search instead for 
Did you mean: 

R310 Unleashed unable to upgrade from v200.7.10.102.64

rafe_oxley
New Contributor II

R310 running 200.7.10.102.64, installed via online upgrade.

APs appear to be working OK, but unable to upgrade. 

Able to remotely connect to dashboard, but under "Admin and Services" options can be actioned but are not processed, including upgrade ability.

Image_ images_messages_61dd6e2bb1f6a946cc0c7a98_f3bb05240db6e173122a8d9b59956a0b_R310upgrade-57c4b97b-ed2b-440d-bb2f-eb2560fdc1dc-1909925135.jpg

I have tried various browsers, disabled any LAN firewall drop rules.

"restore factory settings" appears to work, and rebuild, but does not actually reset the AP.

On remote SSH access to AP, username and password accepted but then SSH session closes.

I have not been able to try a physical reset, not convinced even that would work.

Any ideas? Is there a flash on boot type process?

1 ACCEPTED SOLUTION

syamantakomer
Moderator
Moderator

Hi Rofe,

This seems a browser issue.

Could you try Firefox and Edge and see if you are able to see the options.

Regards,
Syamantak Omer
Official Rep | Staff TSE | CWNA | CCNA | RASZA | RICXI

View solution in original post

10 REPLIES 10

sarita_shekhar
Moderator
Moderator

Hello @rafe_oxley ,

Please make sure the AP has the DNS entry configured. You can verify it under the Admin & Services --> System --> IP Settings:

https://docs.commscope.com/bundle/unleashed-200.9-onlinehelp/page/GUID-3165BBFB-9B32-413F-A11F-95FC4...

On the member AP, you can login to the CLI (SSH access) and run the command 'get dns'

If none, then you need to configure the DNS to perform the 'Online Upgrade' else you can try the manual upgrade by selecting the 'Local Upgrade' option.

Let me know if this helps answer your query.

Regards,
Sarita Shekhar | CCNA | CWNA
Senior Technical Support Engineer,
https://support.ruckuswireless.com/contact-us

Hi Sarita,

thanks for a prompt response

Image_ images_messages_61dd7869caf3a82d69353958_d036806af4a49a96f2666c58bda058ca_DNS-8fe729ae-492d-455d-a7d5-c9962c97b0c3-1763057284.jpg

 

DNS set via DHCP (static lease) 

(There is no CLI access to AP via SSH)

sarita_shekhar
Moderator
Moderator

Hello @rafe_oxley,

200.7 is the last release for R310. You can only upgrade to the updated built on the same release (not a new firmware)

You can use the below link to download the 200.7.10.202.127 firmware file for R310:-

https://support.ruckuswireless.com/software/3023-ruckus-unleashed-ap-200-7-10-202-127-mr-refresh6-so...

Select the Local Upgrade and upload the file to upload it manually.

Regards,
Sarita Shekhar | CCNA | CWNA
Senior Technical Support Engineer,
https://support.ruckuswireless.com/contact-us

rafe_oxley
New Contributor II

Hi Sarita,

as per the first picture -

no current firmware version reported,

no online upgrade even when checking activated,

local upgrade is not selectable.

It just sits at that state.

No diagnostics available, network connectivity test does not work