SCG200 - How can I block traffic through DataPlane SCG-D1

[jardel_almeida1]

How can I block traffic by Data Plane1


Friends,
We are working with SCG200, and have set up a new Datapla. I would like to know how do I block DP-0 traffic, forcing the new Data plane (DP-1) to take over?


I've tried ACL without success.
I have already tried via the command line, both in the AP, and in the CLI of the SCG, also to no avail.

CLI-AP:

set tunnelmgr : set tunnelmgr {options}

                 -> disable/enable

                 -> tunnel

                 -> type [mode comcast]

                 -> auth

                 -> port

ü  rkscli: set tunnelmgr SCG-D Sorry, no match to set tunnelmgr SCG-D found

 ü  rkscli: set tunnelmgr SCG-D Sorry, no match to set tunnelmgr SCG-D found

 ü  rkscli: set tunnelmgr SCG-D 1Sorry, no match to set tunnelmgr SCG-D 1 found

 ------------------------------------------------------------------------------------

 ARC-RJ-WLC-R08# remote ap-cli D4:68:4D:10:11:00 "set tunnelmgr port SCG-D0 disable"

Error: parameter error -- Agrument must be digits

 ARC-RJ-WLC-R08# remote ap-cli D4:68:4D:10:11:00 "set tunnelmgr SCG-D0 disable"

Error: parameter error -- Agrument must be digits

 ARC-RJ-WLC-R08# remote ap-cli D4:68:4D:10:11:00 "set tunnelmgr port SCG-D0 port disable"

Error: parameter error -- Agrument must be digits

 ARC-RJ-WLC-R08# remote ap-cli D4:68:4D:10:11:00 "set tunnelmgr SCG-D0 disable"

ARC-RJ-WLC-R08# remote ap-cli D4:68:4D:10:11:00 "set tunnelmgr SCG-D0 disable"

Error: parameter error -- Agrument must be digits


Any tips?

"get tunnelmgr"

------ TUNNELMGR Information ------
tunnelmgr Service:      Enabled
Tunnel Establishment:   Enabled
Tunnel Authentication:  Enabled
Tunnel Cipher:          Disabled
PMTU Discovery:         Enabled
Node Affinity:          Disabled
Force Fragmentation:    Disabled
Tunnel Type: Ruckus-GRE
SCG-D IP List:       =1@[x.x.x.x]:23233,[y.y.y.y]:23233
Internal Subnet:        10.x.0.0
GRE over UDP: AP/SCG-D UDP port # 23233/23233
Keep Alive Interval/Retry-limit: 10/6
Keep Alive Interval2: N/A