Meshed ZD1100 | Migration - vSCG Controller Version 3.1.1.0.450

[gerard_3770286]

Suggestions Welcome. It’s about a meshed network, and the migration to vSCG Controller Version 3.1.1.0.450.  So far I've upgraded the software on the ZD1100 to the latest one I could find.  9.10.1.0.59 . On putty to the  AP’s ( ZF7982 ) The commands are not recognised. I started at the last one in the hop, thinking I could migrate from that point.  The only command that sort of works is the ( set director ip } But nothing happens. The site has been tested with other stand alone ZF7982 AP's, to the controller. I really do not want to pull everything down i.e rebuild.

[seanmuir]

I have been using the migrate-ap scripts which involves a script file that needs to be loaded on to the ZD prior to migration.

See link below for my own documented process:

migrate AP scripts:

https://app.box.com/s/dov51x2j675zm8tqfwj2sfcqoenkfv1t

ZD to SCG Migration:

https://app.box.com/s/tvld2rnl52kxbqm0toim48pw6fg55nk5

ZD to SCG scripts including MESH AP's: 

https://app.box.com/s/ijf0p6r5baeq1txuk4mwzebieuu9f149

Good Luck

[ipworkers_ipwor]

This scripts works in any ZD and SCG versions?

[seanmuir]

I think its like 9.6 or something on the ZD side and whatever on the SCG as the temp image is 1.1

Also note the box link to the ZD to SCG document is changed to the following as the old link didn't work to obtain the files:

ZD to SCG Migration:

https://app.box.com/s/s17npwgr6jqdm7r5esnfa0c91btfmv1w

Ive done this 10 times now and it all goes smooth as long as you dont go outside of process

[ipworkers_ipwor]

ok, I have vSZ 3.2.0.0.790, and there is not the Zone option "Create new form ZD backup". Then, I think that the migration are not possible.

[seanmuir]

Ah OK so MESH adoption does not look possible on vSZ or vSCG 😞

Let me look in to this and ill let you know after the holidays