MIGRATE AP FROM SMARTZONE TO DIFFERENT SMARTZONE

[darwin_barredo]

Hi Guys is there any ways to migrate the multiple ap from smartzone to diffrent smartzone? i know we can use remote ap-cli  but it is for single ap only. 

NOTE : the version of the controller is 5.1.2 so we cannot use AP CLI SCRIPTS ALSO

[sanjay_kumar]

Hi Darwin,

You can try loading the AP CLI script to apply the new controller IP to all the APs.

Below is the sample AP CLI Script:

fw_version=firmware of the AP
model=all
set scg ip x.x.x.x (new controller ip)

Below is the KB article for more info.
https://support.ruckuswireless.com/articles/000004057

Make sure to change the AP firmware version (existing AP firmware) on the script.

1. Open a notepad.
2. Copy the above content and save it.
3. On the existing SZ\vSZ, load the text file and apply.
4. Now all the APs will have the new controller IP and will try to connect to it.

[darwin_barredo]

Hi Sanjay is says that set scg ip script are not allowed in the version 5.1.1 

[jinsai_jiang]

Maybe changing the controller IPaddress works.
But I‘m not sure,that’s just a guess .

[david_black_594]

If you’re moving multiple APs you can use DHCP option 43 and reboot the APs.

[jinsai_jiang]

I think we can set some APs in one domain to another through the public Internet . But I don't know what benefit could be get by this method,maybe just for fun or just a try of experiment.