Add T310 to Ruckus Virtual SmartZone Controller

[Anonymous]

Hi,

I am trying to convert the Ruckus T310 AP to join our managed smartzone controller. I have done this for our R310/R510 numerous times withou any issues but the putty commands don't appear to be the same or work.

I feel it needs a particular software install on it to work but I can't seem to find it or if its even possible!

Any help would be greatly appreciated.

Thanks

[Anonymous]

@ratnadeep_nandi 

Hi,

I am getting this error with that software though.

[Ratnadeep]

@luke_blundell

Hi Luke,

Are you trying with 200.11.x version? Please upgrade the AP to 104.x version.

Download the firmware from the below URL:

https://support.ruckuswireless.com/software?filter=64#sort=relevancy&f:@source=[Software%20Downloads...

Regards,

Ratnadeep

[Anonymous]

Yes I am - I have tried all the versions from T310C D N S and none are working for me.

[Vineet_nejwala]

@luke_blundell

If I am correct this Master AP T310 has another Member t300 AP connected to it ? If yes can you follow below :

1) Disable member AP T300 (shut that port)

2) Perform F/D on T310 AP and upload standlaone image again.

Let us know how that went.

Best Regards

Vineet

[Anonymous]

Hi,

I have upgraded it finally but the putty commands are still not working.

Please see attached.

Thanks