11-18-2021 05:54 AM
Hi,
I am trying to convert the Ruckus T310 AP to join our managed smartzone controller. I have done this for our R310/R510 numerous times withou any issues but the putty commands don't appear to be the same or work.
I feel it needs a particular software install on it to work but I can't seem to find it or if its even possible!
Any help would be greatly appreciated.
Thanks
11-18-2021 05:57 AM
Hi Luke,
Can you share the screenshot of the command you are executing on this AP CLI and the output of "get version" from this AP.
Best Regards
Vineet
11-18-2021 06:06 AM
@vineet_nejawala Hi Vineet,
Thanks for the quick reply.
I have tried quite a few commands including:
set scg enable - not recognised
get scg - not recognised
enable - works
ap-mode - works
set scg ip: - not recognised
11-18-2021 06:12 AM
@luke_blundell
Hi Luke,
Yes, it's on Unleashed version. Please upgrade the AP to any Solo version from the below URL:
Please refer to the below KB to upgrade the AP from CLI:
https://support.ruckuswireless.com/articles/000001551
Regards,
Ratnadeep
11-18-2021 06:14 AM
Luke, the AP is in Unleashed code and hence the difference in CLI pattern. I am adding below an article to convert such Unleash code AP to standalone and second link to download the standalone image that is compatible with SZ.
https://support.ruckuswireless.com/articles/000005193
Best Regards
Vineet