ruckus not working

[nwi2247]

Hello,

I have tried 3 times to reset my ruckus and it doesn't work.

The access points have no lights on them. 

Please let me know how to fix this. THank you

Its RUCKUS ICX 7150-C12P

[nwi2247]

How I do upgrade the switch please?

[Imran_ruckus]

Hi @nwi2247

Thank you for the response.

Please follow the below steps to proceed with the Switch upgrade.

The recommended stable version is 8095g (08.0.95g) 

The Upgrade path would be 8061a>>8080f>>8095g 

Below are the options or methods to perform the Upgrade on the switch: You could choose any one of these.

1st Option:

1. In this option, we will use a pen drive or USB flash drive in which we move the files to the pen drive and connect it to the Switch then through CLI we execute the commands to upgrade the Switch using the following guide as a reference:

How to Upgrade a Switch ICX-7150-C12P using a USB flash drive

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-Upgrade-a-Switch-ICX-...

2nd Option:

2. The following guide is an example of an upgrade via TFTP server, by using an application (FREE) to send files or upload remote files to a device, in our case, we will use it to update a new version to the Switch, basically it will send the image version remotely from the computer to the switch.

How to upgrade a Switch ICX7150-C12P via TFTP

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-Upgrade-a-Switch-ICX-...

3rd Option:

3. In this option we Upgrade the Switch from the Web Interface (GUI) of switch.

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-perform-an-Upgrade-vi...

Try to access your switch from a web browser by pasting the below URL in http or https form whichever that works.

https://0.0.0.0 or http://0.0.0.0 (IP address of Switch. 0.0.0.0 is just as an example)

As you can access CLI, I would suggest you follow the 2nd option.

Please let me know if you have any queries in this regard.

Thank you again for your patience.

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.

[nwi2247]

Hello,

Thank you. So it booted up for a couple minutes and again went out. The network is no longer discoverable and no lights on the access points. 

[Imran_ruckus]

Hi @nwi2247 

Thank you for the response and the information.

Could you please proceed with the Upgrade of the Switch as described in my previous post? 

Please let me know if you have any queries in this regard.

Thank you again for your patience and understanding.

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.

[nwi2247]

Hi,

copy tftp flash 10.45.19.152 spz10114.bin bootrom   where is the name of this file I use for putty  ? cause this IP is specific to examples computer IP address? Thanks