cancel
Showing results for 
Search instead for 
Did you mean: 

ruckus is running slow

sumitrangdal
New Contributor

I got Ruckus switch ICX7150-C12 Switch and 2 access points. The internet is running slow when access the internet through ruckus access points where as accessing the internet directly from ISP is faster. When I checked for internet speed test on my phone then that also shows slow internet speed on the device where as ISP shows good internet speed. Can you please help to resolve the issue with slow internet?

4 REPLIES 4

Jayavidhya
Moderator
Moderator

Hi @sumitrangdal

Please let us know if you have faced any power outage recently or not.

If you have confirmed that internet issue is stable while you are connecting to the ISP router, but the issue persists while you are connecting to the access points or the switch, it looks like your Switch (ICX7150 Switch) may be booting from the secondary partition ( Note: Secondary partition contains the routing code)  which is causing the bad connectivity issues. This could happen after multiple power outages, please follow up the next guide.

How to Fix Routing code issues on Lennar Home users via Web GUI.

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-Fix-Routing-code-issu...

 How to Fix Routing code issues on Lennar Home users via CLI

Guide#1 for CLI: 

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-Fix-Routing-code-issu...

Guide#2 for CLI: 

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-solve-the-routing-cod...

Note:  if you have access to the Unleashed Dashboard and the Switch can be seen from there, it may look like the following image, ICX7150-C12-Router instead of ICX7150-C12-Switch, now before starting the steps of the guide, I will advise you to cable the computer directly to the Switch, since you will have a better connectivity than if you connect via wireless. 

  1. After fixing the issue of the Switch booting from the wrong partition, please perform an upgrade to the code 08095g UFI and upgrade both partitions primary and secondary with the switching code file named SPS08095gufi.bin, take into consideration that is the Switch is running a code lower than 08080 you need to upgrade twice, from the code you are to 08080f and then the recommended code 08095g UFI.

How to Upgrade a Switch ICX-7150-C12P using a USB flash drive

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-Upgrade-a-Switch-ICX-...

How to upgrade a Switch ICX7150-C12P via TFTP

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-Upgrade-a-Switch-ICX-...

Upgrade a switch via Web GUI (ICX7150 Switch)

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-perform-an-Upgrade-vi...

Best regards,

Jayavidhya

Lennar Home Community

 

 

 

sumitrangdal
New Contributor

Hi,

I have followed the instructions provided in the Upgrade a switch via WebGUI document and upgraded my switch to using SPR09010dufi.bin firware. I saw it was the latest. Now my internet is running more slow. Moreover I am not even able to access to ruckus switch now with the ruckus switch ip. I am getting the error indicating it is unreachable. Please help to resolve the issue.

Jayavidhya
Moderator
Moderator

Hi @sumitrangdal

As already explained in previous posts on how to access the Switch, in order to fix the routing code issue, which in one of the symptom is slow connectivity, let add the guides back, important the access to the switch must be through console, and please read the guides carefully before start the troubleshooting.

How to console in the ICX-7150-12CP 'Ruckus Switch'

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-console-in-the-ICX-71...

RUCKUS ICX 7150 USB TYPE C CONSOLE (tutorial video)

https://www.youtube.com/watch?v=YXR4xhkw3q8

How to Fix Routing code issues on Lennar Home users

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-Fix-Routing-code-issu...

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-solve-the-routing-cod...

 
 

You can follow below :links

https://www.youtube.com/watch?v=z4zbJcBSuuw

https://www.youtube.com/watch?v=koUNH9OaadQ

Best regards,

Jayavidhya

Lennar Home Community

 

sumitrangdal
New Contributor

Hi,

I have installed the version that you have mentioned on primary partition but when I am trying to copy it to secondary partition then I am getting below error (Invalid input) Can you please let me know how to resolve it?

SSH@ICX7150-C12 Switch>show flash
Stack unit 1:
NAND Type: Micron NAND 2GiB (x 1)
Compressed Pri Code size = 31457280, Version:08.0.95gT211 (SPS08095g.bin)
Compressed Sec Code size = 33554432, Version:09.0.10dT213 (SPR09010d.bin)
Compressed Pri Boot Code size = 786944, Version:10.1.24T225 (mnz10124)
Compressed Sec Boot Code size = 786944, Version:10.1.25T225 (mnz10125)
Code Flash Free Space = 997261312
SSH@ICX7150-C12 Switch>copy flash flash secondary
Invalid input -> copy flash flash secondary
Type ? for a list
SSH@ICX7150-C12 Switch>