power outage, ruckus not working at all. all lights flashing

[SIBAZZ]

Hello , MY RUCKUS SWITCH FLASHING ALL LIGHTS. HOW DO I GET IT UP AND RUNNING AGAIN

I tried resetting by unplugging and leaving reset pin and the letting go when everything is flashing

i cant seem to get this to work. how can i fix this

[Jayavidhya]

Hi @SIBAZZ 

- Please let us know the LED status of the switch and the access points using the below guide.

R510 LED lights

https://docs.commscope.com/bundle/unleashed-200.12-onlinehelp/page/GUID-19D4261B-D10B-4DE3-B63A-3498...

RUCKUS LED lights

https://docs.commscope.com/bundle/icx7150-installguide/page/GUID-973C8AE8-837A-41C7-9811-BAEF6ADEF3D...

Please let us know if you have any queries in this regard.

Best regards,

Jayavidhya

Lennar Home Community
 

[SIBAZZ]

 

[Jayavidhya]

Hi @SIBAZZ 

Greetings of the day,

Based on your description, it seems that your switch has one green and one yellow light, it means that the switch is stuck in boot mode.

1-Please try to disconnect from the Power outlet the ICX- 7150 and reconnect it.

2-Please try to press the reset button using a paper click or a small stick 

1.  Remove power from the switch.
2. Press and hold the Reset button while applying power to the switch.
3. After all the system LEDs flash amber, release the Reset button.

https://docs.commscope.com/bundle/icx7150-installguide/page/GUID-D3B5DB74-53A7-4F8D-82F9-6EB600879EE...

Video link:https://www.youtube.com/watch?v=6jHMTdo_hK4

Best regards,

Jayavidhya

Lennar Home Community
 

[SIBAZZ]

Okay I did that, and now all the amber lights have been blinking for 20 minutes