I have gone through these forums before, I have a Lennar home with a Ruckus switch and 2 ap's. Everytime the power has gone off in the last 2 years it has gotten more difficult to get it rebooted. I have gone through everything I was told the last time and this thing will not boot up. I work from home and this makes life complicated. I have spent over 2 weeks trying to get this thing rebooted, enough is enough. Either send a replacement or a tech to come out and resolve the issue.
Note: after fixing the issue of the Switch been stuck in boot mode, please perform an upgrade to the code 08095g UFI and upgrade both partitions with the switching code file named SPS08095gufi.bin, so perform the software recovery using the code 08090k with the upgrade image file named SPS08090k.bin, then when the switch is back to normal upgrade to the file SPS08095gufi.bin for both partitions primary and secondary.
1.Upgrade a Switch ICX-7150-C12P using a USB flash drive