Hello RUCKUS Lennar Community, Greetings of the day!!! We have recently introduced the RUCKUS Lennar Knowledge Base self-help guides portal section within this Community for Lennar Home users. It includes the most common issues and some technical gui...
Hello RUCKUS Community Team, Greetings of the day!!! This post is with regards to the announcement details we posted on this Community forum (on 06-22-2023) regarding the iPhone with iOS 16 version login issue unable to reach “unleashed.ruckuswireles...
Welcome to your primary source for RUCKUS Lennar SmartHome Support! Before posting please review these suggestions. Please be sure to read the RUCKUS Community GuidelinesPlease be considerate and respectful. We understand you may be frustrated, but p...
Hello Everyone,I have an ICX7150-C12 Switch and AP which came with the Lennar home I purchased back in April of 2020. For about two years there was nothing to complain about but then the power went out for three or four seconds and the headaches beg...
After house power quickly cycled off and on about a dozen times during a recent storm, Ruckus no longer processes internet traffic, although AP radios are on and it shows clients. I've had to move all my devices to the AT&T router to get internet. Un...
In this example we are going to use a USB/flash drive or pen drive to upgrade a switch from a non-UFI 8070 version to 8095h UFI version Note: The USB/flash drive should be in FAT32 format, and it should be a STANDAR A USB Here is quick guide how to d...
1: Type “CMD” from start button and open:2: Run the Following command: "arp -a", now you can see the IP or internet address of the switch, and the physical address, however you need to know the physical address that can be located on a sticker in the...
You will need one of the following cables: An USB console cable with Type-C connector (In one side you will have a Type-C USB and in the other side a normal USB) Or A serial console cable with an RJ-45 connector (In one side you will have a RJ-45...
