WI-FI Replicator Failure

[MK]

WI-FI Replicator Failure

I have already checked the modem and it is working correctly. I believe I am having a problem with the signal replication inside the house.

It is as if the replication is failing or is too slow or not sending 100% of the information.

This started after a power outage due to a storm.

We have already restarted all the equipment (modem and Wi-Fi replicator), but the problem persists.

[pinky_ruckus]

Hello @MK ,

Thank you for the response.

Really apologize for the confusion.

To proceed further, we need to check few configurations on the Switch.

We would need to find the IP address of the switch and then use the IP address to login to GUI of the switch using the web browser.

I will leave you a guide on how to perform an IP scanner on your local network to identify the switch IP address very easily. 

How to find my Ruckus “Devices IP address” using free applications:

https://community.ruckuswireless.com/t5/RUCKUS-Lennar-Support-Knowledge/How-to-find-the-IP-Address-o...

Once we identify the IP address of the Switch proceed to access the RUCKUS ICX-7150-C12P Switch using a Web Browser.

Please click on Login option and try to access the Switch GUI using the login credentials.

Please let us know once you log in to the Switch GUI using the browser.

Thank you again for your patience and understanding. 

Best regards,

Pinky Rajendran

RUCKUS Lennar Home Community.

[MK]

I was able to open the terminal at Mac. When I type enable, it shows a list of words and the only common word is "enable".

[MK]

Please, I need help here! I need to work!

[MK]

Can we talk on the phone? I need a quick solution. 
Is the equipment working or can I trow it on the garbage?