WI-FI Replicator Failure

[MK]

WI-FI Replicator Failure

I have already checked the modem and it is working correctly. I believe I am having a problem with the signal replication inside the house.

It is as if the replication is failing or is too slow or not sending 100% of the information.

This started after a power outage due to a storm.

We have already restarted all the equipment (modem and Wi-Fi replicator), but the problem persists.

[pinky_ruckus]

Hello @MK ,

Thank you for sharing the response.

I understand that you are using Mac laptop and you can access the terminal in the Mac laptop to login to Switch.

Once you open the terminal, please follow the below commands as mentioned in the below screenshot.

nc <IPAddress of the device> 23

Example: nc 192.168.1.182 23

If you can access the Command line should look like this:

????telnet@ICX7150-12P Switch>

Once we get the above prompt, we can execute the required commands as shared in the previous post and share the screenshot to check the configurations on the Switch.

Please let us know if you have any queries in this regard.

Thank you for your patience and understanding.

Regards,

Pinky Rajendran

RUCKUS Lennar Home Community

[MK]

I used this option too, and nothing happens. any thing show on the screen

[MK]

After entering the command as you informed, the screen remains static for a minute and then the username reappears to type again.

[pinky_ruckus]

Hello @MK ,

Thank you for the response.

I understand that you are unable to access terminal through Telnet option.

Could you please confirm if you were able to access the GUI of the Switch using Switch IP address through the web browser?

Thank you for your patience and understanding.

Regards,

Pinky Rajendran

RUCKUS Lennar Home Community

[MK]

I have no ideia what you are talking about.