WAP is blinking 2 green lights continuously

[Domala1123]

Hi

my WAP ( both ground and top floor ) 2 green lights blinking but wireless WiFi name is not showing available list 

please call me : <removed my moderator> to troubleshoot this issue 

I have ICX-7150- C12P installed with 2 WAP connections .

 Thanks 

Dayakar 

[Domala1123]

Hi Yarenis,

WAP 1 : Only power  button is blinking ( green) and control button is green .

WAP 2 : both power and control button is blinking ( green)

Can you please call me :<removed by moderator> to troubleshoot.

Thanks

Dayakar 

[Yarenis]

Hi @Domala1123 

Ok, According to the description none of the Access Points are online, so you need to check the connection between the ISP router to the ICX7150 Switch, because the one that connectivity will be the ISP router, let add an example in how should go the connections.

1:Connections example:

Most common Setups for Lennar homes users

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/Most-common-Setups-for-Lenna...

Ruckus at Home: Introduction(Tutorial video)

https://www.youtube.com/watch?v=vFD_ByQWGH0

2:Confirm that the ISP router is online, by wiring the computer to the router and test if it's online.

This is Ethernet cable to wire the devices together.

3:Confirm that the ICX 7150 Switch is online, so do the same, but this time wiring the computer to the ICX 7150 Switch.

Note: the white box is the switch, you can use any of the yellow ports.

Note:Please provide the model of your ISP router, and Ruckus Support for Lennar Homes customers will be exclusively supporting customers via forum support model, please do no share personal data in your post.

Best regards,

Yarenis Hernández

Technical Support Engineer | L2 TAC Wired