Upgrade Firmware Lennar ICX-7150-CP12

RUCKUS Community Forums are now in READ-ONLY mode while we migrate to a new platform.

You will still be able to read posts and knowledge articles, but will be unable to post new content until Go Live on the new platform Monday August 17.

Lennar Smart Home customers: please contact [email protected] for assistance during the week of August 9-17.

Is it possible/recommended to keep our switches updated with new firmware?

Is it also possible to use a router layer 3 capable software? It looks like the "lennar" version is SPS.. which I think is designated as switch only? does this mean layer 2? Thx if anyone has any insight.

SSH@ICX7150-C12 Switch>sho ver
  Copyright (c) Ruckus Networks, Inc. All rights reserved.
    UNIT 1: compiled on Jan  5 2021 at 21:06:08 labeled as SPS08090j
      (29360128 bytes) from Primary SPS08090j.bin (UFI)
        SW: Version 08.0.90jT211
      Compressed Primary Boot Code size = 786944, Version:10.1.18T225 (mnz10118)
       Compiled on Mon Jul 13 08:53:29 2020

  HW: Stackable ICX7150-C12-POE
==========================================================================
UNIT 1: SL 1: ICX7150-C12-2X10GR POE 12-port Management Module
      Serial  #:FEK3849----
      Software Package: BASE_SOFT_PACKAGE
      Current License: 2X10GR
      P-ASIC  0: type B160, rev 11  Chip BCM56160_B0
==========================================================================
UNIT 1: SL 2: ICX7150-2X1GC 2-port 2G Module
==========================================================================
UNIT 1: SL 3: ICX7150-2X10GF 2-port 20G Module
==========================================================================
 1000 MHz ARM processor ARMv7 88 MHz bus
 8192 KB boot flash memory
 2048 MB code flash memory
 1024 MB DRAM

1 REPLY 1