Upgrade Firmware Lennar ICX-7150-CP12

[dfense]

Is it possible/recommended to keep our switches updated with new firmware? 

Is it also possible to use a router layer 3 capable software? It looks like the "lennar" version is SPS.. which I think is designated as switch only? does this mean layer 2? Thx if anyone has any insight.

SSH@ICX7150-C12 Switch>sho ver
  Copyright (c) Ruckus Networks, Inc. All rights reserved.
    UNIT 1: compiled on Jan  5 2021 at 21:06:08 labeled as SPS08090j
      (29360128 bytes) from Primary SPS08090j.bin (UFI)
        SW: Version 08.0.90jT211
      Compressed Primary Boot Code size = 786944, Version:10.1.18T225 (mnz10118)
       Compiled on Mon Jul 13 08:53:29 2020

  HW: Stackable ICX7150-C12-POE
==========================================================================
UNIT 1: SL 1: ICX7150-C12-2X10GR POE 12-port Management Module
      Serial  #:FEK3849----
      Software Package: BASE_SOFT_PACKAGE
      Current License: 2X10GR
      P-ASIC  0: type B160, rev 11  Chip BCM56160_B0
==========================================================================
UNIT 1: SL 2: ICX7150-2X1GC 2-port 2G Module
==========================================================================
UNIT 1: SL 3: ICX7150-2X10GF 2-port 20G Module
==========================================================================
 1000 MHz ARM processor ARMv7 88 MHz bus
 8192 KB boot flash memory
 2048 MB code flash memory
 1024 MB DRAM