02-16-2024 07:45 AM
Hello all. I'm having the same problem and none of the solutions provided seem to work. I've tried connecting to the switch using the Unleashed IOS app (yes I've updated to the latest version) and receive the message "You are not connected to Unleashed network.". I don't see the Lennar-XXXXXXX network and when I try to access it directly it indicates that it is not a valid network. I've found the IP address of the master AP but when I go to it via the web I don't know the credentials (I've tried using my Unleashed credentials with no success). I've tried using that IP in the Unleashed app by changing the login destination to the IP but it does not connect. I've tried accessing Unleashed through the web address unleashed.ruckuswireless.com but get a potential security warning. Can anyone help!?
02-16-2024 08:16 AM
Hi @dabel524
Physical Factory Reset an Access Points Ruckus
https://support.ruckuswireless.com/articles/000012418
3:Ones the Master has been reset, the default SSID configure.me will appear, so you can follow up the step to create the Unleashed system from zero from the app or web, let me add the tutorial video for both options
Ruckus Unleashed Set-up using your Mobile
https://www.youtube.com/watch?v=vFD_ByQWGH0
https://www.youtube.com/watch?v=j8I5aVwMNMg
Best regards,
Yarenis Hernández.
Technical Support Engineer | L2 TAC Wired
COMMSCOPE
now meets next
10:00 AM to 7:00 PM CST | Sat & Sun- Off
Have a question or need to escalate “Chat Now”
RICXI|RCNA|CCNA|
02-21-2024 07:14 AM
Hi @dabel524
Greetings!!!
Thank you for contacting Lennar Home Community.
Hope you are doing well!!!
Thank you for the detailed information you shared.
As per the case description, I understand that you are unable to log into the RUCKUS Unleashed system.
Please log in to your Unleashed system on a LAPTOP WEB BROWSER using the Master AP IP Address OR https://unleashed.ruckuswireless.com/ ? Please check the current version of your Unleashed Access Points and share a screenshot of the same.
Please do not worry if it shows a certificate security warning. It is an expected part.
If you do not know the login credentials, please try with the default credentials provided in the below screenshot:
These usernames and passwords are key sensitive, please use capital letters where necessary
Please check and let me know if you have any queries in this regard.
Thank you again for your patience and understanding.
Best regards,
Imran Sanadi
RUCKUS Lennar Home Community.