04-27-2025 01:03 PM
I haven’t logged on my unleash app in a while and now it’s telling me I’m not connected to unleash network
Solved! Go to Solution.
07-28-2025 04:07 PM
Imran
I did the update, delete and reinstall the app and everything is working fine now . It’s also updated to the new version you mentioned. Thank you so much
07-29-2025 05:23 AM
Hi @Famous1
Thank you for your response and the update.
That’s great to hear! I’m glad that you were able to upgrade the Unleashed, and the issue has been resolved.
We truly appreciate your time and patience throughout this case.
Thank you once again for reaching out to the RUCKUS Lennar Home Community. Should you have any further questions or need assistance in the future, please don’t hesitate to contact us.
Wishing you a wonderful day ahead!
If your issue has been fully addressed, please click the Kudos button and mark the responses as an Accepted Solutions.
Best regards,
Imran Sanadi
RUCKUS | Lennar Home Community Support
07-18-2025 03:43 PM - edited 07-29-2025 06:42 PM
from this screen I went ahead and try all the passwords you provided with the “admin” username and none worked
07-21-2025 08:12 AM
Hello @Famous1 ,
Thank you for the response.
From the response you shared, it seems that the Ip address you used to login to the Unleashed dashboard appears to be of ICX-7250 Switch and not of the Access point..
Once you access the IP address from the IP Scan results,(Please share the screenshot of the IP scan results) to confirm that the IP address is associated with the AP, you should observe the Unleashed Dashboard, which should be visible upon accessing the appropriate IP address, as illustrated in the screenshot below.

Please share the requested information and let us know if you have any queries in this regard.
Thank you again for your patience and understanding.
Best regards,
Pinky Rajendran
RUCKUS Lennar Home Community.
07-23-2025 10:13 AM - edited 07-29-2025 06:41 PM
this is the results
07-23-2025 10:53 AM
Hello @Famous1 ,
Thank you for the response.
Could you please try using a different working Ethernet cable with the non-working access point. The current cable might be faulty
Also, please try to use the IP Address of the Non-working AP and check if you are able to access the Unleashed dashboard.

Once you see the above dashboard, please try to use the login credentials and check if you are able to access the dashboard.
Please let us know if you have any queries in this regard.
Thank you for your patience and understanding.
Regards,
Pinky Rajendran
RUCKUS Lennar Home Community
07-23-2025 03:59 PM
Ok so I was able to log in the ruckus dashboard. What should I do next?
