Switch stuck in router mode

[Cg44150]

Icx7150 switch stuck in router mode. Will not connect access ports. Need a replacement.

[Cg44150]

After booting the ap looks like this 

 

[Imran_ruckus]

Hi @Cg44150 

Thank you for the response and the information you shared.

As per the light status of the RUCKUS ICX-7150-C12P Switch and Access points, they seem to be in a normal state.

As you mentioned your Switch may be stuck on the Routing Code due to the power outage.

Please follow the below RUCKUS 'Lennar Home Knowledge Base' self-help guide to get this issue fixed.

https://community.ruckuswireless.com/t5/RUCKUS-Lennar-Support-Knowledge/Fixing-RUCKUS-ICX-7150-C12P-...

Please follow the above guide and let me know if you are stuck at any point during the process.

Thank you for your patience and understanding.

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.

[Cg44150]

 

I have already done the above. At first I could not get the up address because I cannot access the switch in the unleash app. Then when I got theIP address I kept getting errors. I am NOT going through that again. And I don’t have a cable to connect directly. I need a new switch please. I will be happy to return the old one.

[Cg44150]

If I just needed those directions I wouldn’t be on here.

[Cg44150]

No response?