06-11-2023 07:43 AM
None of the APs (4) are receiving signal from the switch.
06-16-2023 03:05 PM
Hi @Silverbullet
Thank you for the response and the information.
Please try to Access the COM3 and COM4 as Serial Line with Speed 9600. I believe you have tried COM4 once.
Could you please reboot your Switch once and perform the software recovery once again on Putty?
If still you are getting the same result, I request you please download the MobaXterm app similar to Putty and perform the same operation once again there.
Below is the link to download the MobaXterm application:
Mobaxterm: https://mobaxterm.mobatek.net/download-home-edition.html
Please let me know if you have any queries in this regard.
Thank you again. We appreciate your patience and understanding.
Best regards,
Imran Sanadi
RUCKUS Lennar Home Community.
06-16-2023 03:10 PM
I have tried that as well.. and have also rebooted the ruckus while restarting both putty and Moba. I have to use the com 4 port... com3 will not work... let me launch moba again.
06-16-2023 03:15 PM
06-16-2023 03:28 PM
Hi @Silverbullet
Thank you for the response and the information you shared.
Please also try COM3.
If still it’s not working, please provide a PICTURE and VIDEO following with the process showing all the physical cable connections. (Please refer to the below screenshot)
Please use the below link to upload a VIDEO by following the process with getting an error and showing all cable connections between the Switch and Laptop/PC:
https://drive.google.com/drive/folders/16lG-j0MSKzjqBJSY4rsgh4myUlseA9bz?usp=sharing
Please let me know if you have any queries in this regard.
Thank you again for your patience and understanding.
Best regards,
Imran Sanadi
RUCKUS Lennar Home Community.
06-16-2023 03:37 PM
Imran: I'm sorry, but I've already tried everything you have asked and more. I've included pictures of everything and I'm still back to where I started; we are going in circles. The device is not responding to anything. It's time to escalate this to the next level.