Switch IP not showing up in IP scanner. How do I get the IP?

[Crossrun21]

I have read many posts on how to fix the switch after power outage, but the ip scanner shows the APs but no switch IP address. Is there another way to get that IP address?

[Crossrun21]

I was able to connect to the console. Version says 08.0.80dt213. LLDP is not running. You mention I would need to upgrade, how do I do that?

[Jayavidhya]

Hi @Crossrun21 

Please perform an upgrade to the code 08095g UFI and upgrade both partitions primary and secondary with the switching code file named SPS08095gufi.bin, take into consideration that is the Switch is running a code lower than 08080 you need to upgrade twice, from the code you are to 08080f and then the recommended code 08095g UFI.

How to Upgrade a Switch ICX-7150-C12P using a USB flash drive

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-Upgrade-a-Switch-ICX-...

How to upgrade a Switch ICX7150-C12P via TFTP

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-Upgrade-a-Switch-ICX-...

Upgrade a switch via Web GUI (ICX7150 Switch)

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-perform-an-Upgrade-vi...

Best regards,

Jayavidhya

Lennar Home Community
 

[Crossrun21]

We have come full circle and I need the ip address of the switch. As I posted originally there is no Ruckus switch showing up in the scanner. "Ruckus Unleashed" shows up in the router client list but shows the error I previously showed

Is there a way to confirm the ip address while connected via console?

[Jayavidhya]

Hi @Crossrun21 

If access via IP address is not possible here is a guide on how to access to the Switch via console (cable access between your PC to the ICX 7150-C12P) in this case we need a USB type C to USB standard or Console cable Rj45 to USB. 

How to console in the ICX-7150-C12P

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-console-in-the-ICX-71...

Once you have gained access to the switch please follow the below guides on how to upgrade Switch ICX-7150-C12P

How to Upgrade a Switch ICX-7150-C12P using a USB flash drive

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-Upgrade-a-Switch-ICX-...

How to upgrade a Switch ICX7150-C12P via TFTP

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-Upgrade-a-Switch-ICX-...

Upgrade a switch via Web GUI (ICX7150 Switch)

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-perform-an-Upgrade-vi...

Best regards,

Jayavidhya

Lennar Home Community

[Crossrun21]

I followed the upgrade process but it prompts me for a login name and password. I am able to enter a name, but I cannot type anything for the password, what is preventing this?