Stand alone modem

[D1]

Does a stand alone modem not work with the ruckus

[D1]

Password to login is incorrect. Tried hardwired to ICX cannot gain access to change password 

[Yarenis]

Hi @D1 

are you a Lennar home Client? If that is the case, please test the next set of passwords:

Usernames:           Passwords:

admin                    sp-admin

super                     Lennar

                               lennar

                               ruckus

                               Ruckus!

                               Ruckus1

                               admin

                               password

Best regards,

Yarenis Hernández

Technical Support Engineer | L2 TAC Wired

[Yarenis]

Hi @D1 

No, For Lennar home clients we recommend using a router connected to the ICX 7150 Switch in order to run the next important protocol: NAT (to convert the private communication in your network to the Internet) and DHCP to provide IP addresses to the devices connected in your network) including the same ICX 7150 Switch, now we can run DHCP from the Switch but not NAT.

Note: for more information about possible Lennar homes set up, check the next guide:

Most common Setups for Lennar homes users

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/Most-common-Setups-for-Lenna...

Ruckus at Home: Introduction(Tutorial video)

https://www.youtube.com/watch?v=vFD_ByQWGH0

Best regards,

Yarenis Hernández

Technical Support Engineer | L2 TAC Wired