cancel
Showing results for 
Search instead for 
Did you mean: 

Ruckus ICX 7150-C12P

bkpatel009
New Contributor III

Ruckus is on, but both R510 Extenders does not show any lights on it.WAP.jpgRuckuspic 1.jpgRuckuspic2.jpg

1 ACCEPTED SOLUTION

I am getting this error after I entering the command: "Boot system flash memory"Fatal error.png

View solution in original post

45 REPLIES 45

In my upgrade folder the last file is,  "SPS08095hufi.bin and not SPS08095gufi.bin". Would that be a problem?

Hi @bkpatel009 

Thank you for the information.

That is the 8095h Version. And we recommend 8095g. Before that could you please confirm if you have the other 2 correct files (mnz10114.bin and SPS08080f.bin) of 8080f and entered a correct tftp IP in Telnet CLI?

Please check, confirm and let me know if you have any queries in this regard.

Thank you again for your patience.

 

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.

Everything is updated as you have requested. please advise me of next steps.Everything is updated as requested.png

Please help me in selecting Y or N for the command that you see in the pictureputty Y or N.png

Hi @bkpatel009 

Thank you for the information.

Please make sure you add the SPS08095fufi.bin file.

Once you add all 3 files, please click on Show Dir>select first file>copy>paste on CLI command where it is required, by mouse right click.

And please follow the guide, we have explained in detail step-by-step.

Please let me know if you have any queries in this regard. Apologies, as I am already out my shift hours already, I will assist you on Monday.

Thank you again for your patience and understanding.

 

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.