06-26-2023 07:25 AM
Ruckus is on, but both R510 Extenders does not show any lights on it.
Solved! Go to Solution.
07-03-2023 09:34 AM
I am getting this error after I entering the command: "Boot system flash memory"
06-26-2023 09:00 AM
Hi @bkpatel009
Greetings of the day,
Based on your description, it seems that your Access Points has no lights on it. To solve this issue please follow the below steps and let us know the result.
1-Please try to disconnect from the Power outlet the ICX- 7150 and reconnect it.
2-Please try to press the reset button using a paper click or a small stick
Video link:https://www.youtube.com/watch?v=6jHMTdo_hK4
Please let us know if you have any queries in this regard.
Best regards,
Jayavidhya
Lennar Home Community
06-26-2023 09:39 AM
Hello @Jayavidhya
While I follow the above steps do I take all the cables out of all the ports from the Ruckus switch ?
06-26-2023 10:28 AM
Hi @bkpatel009
While following the first step try to disconnect the ICX-7150 from the Power outlet and reconnect it, check whether it is working or not.
While following the second step remove power from the switch.
When all the system LEDs blink green, all the configuration data are erased and the switch is returned to its factory configuration. When all the system LEDs are solid green, the erase process is complete and the system reloads. Once reloaded and the SYST LED is steady green, the factory reset is complete.
Please let us know if you have any queries in this regard.
Best regards,
Jayavidhya
Lennar Home Community
06-26-2023 10:49 AM
Hello @ Jayavidhya,
The above steps have been completed. so I believe now the factory reset on the Ruckus switch is complete. May you please explain the next steps now.