Ruckus ICX 7150 C08P not working

[KB9]

model: ICX 7150-C08P

wifi just stopped working. Unplugged it and plugged back in, reset with a needle, nothing seems to work. I did not download unleashed prior. So I’m unable to log into it. There are 3 green lights on the front. 

I have followed multiple instructions off of this forum without success. I found my IP via advance up scanner. I have downloaded both Mobaxterm and Putty. Both applications time out. I have not been able to move past that part. I have tried via either net cable as well usb cable. 

[Jayavidhya]

Hi @KB9 

Thanks for your response.

Based on the images you have shared it seems that your switch is in normal state. For further troubleshooting we request you to gain access to the switch and share the output of the below mentioned commands.

To gain access to the switch first we need to find the IP address of the switch by using the below guide.

How to find my Ruckus “Devices IP address” using free applications:

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-find-my-Ruckus-Device...

Once you find the IP address of the switch you can access the switch remotely to the device 'Command Line". Here I attach the guide on how to access the switch remotely or' access points'.

How to remotely access to 'ICX 7150-C12P' or 'access points' "Network devices":

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-remotely-access-to-IC...

If you get access to the command line it will look like this:

ICX7150-C12 Router>

enable

Show version

Show flash

Show inline power

Show inline power detail

Please share the output of the above commands.

Also please let us know if you have any queries in this regard.

Best regards,

Jayavidhya

Lennar Home Community